Epson PowerLite 715c User Manual - Page 91
Restoring the Default Settings
View all Epson PowerLite 715c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
note If you access the About menu when the projector display is set to video, you only see the lamp life and the video signal setting. You see the lamp usage hours and computer display settings on the right: Video Audio Effect Setting Capture Advanced About Reset All Lamp ON Time Video Source Input Signal Frequency SYNC Polarity SYNC Mode Resolution Refresh Rate : 9999 H : Computer : RGB : H 999. 99 KHz : V 999. 99 Hz : H Positive : V Negative : Sync On Green : 9999x9999 : 999. 9 Hz :Select The life span of the lamp is about 1000 hours. If the number shown is close to 1000, make sure you have a spare lamp handy. 3. When you're finished, press Esc or Menu. Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Video Audio Effect Setting Capture Advanced About Reset All Execute :Select :Execute Select Reset All and press the Enter button on the remote control to display the confirmation screen. Select Yes to reset all the default settings or No to cancel. 82 Fine-tuning the Projector