Epson PowerLite Pro Z8150NL User Manual - Page 109

Problem Solving 109 Other problems The remote control does not work Check Remedy Is the remote control light-emitting area pointing towards Point the remote control towards the remote receiver. s p.23 the remote receiver on the projector when it is operated? Is the remote control too far from the projector? The operating range for the remote control is about 49 ft (15 m). s p.23 Is direct sunlight or strong light from fluorescent lamps shining onto the Remote Receiver? Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to Off from Remote Receiver in the configuration menu. s Settings Menu - Remote Receiver p.65 Is the correct setting for the remote receiver selected? Check the Remote Receiver from the configuration menu. s Settings Menu - Remote Receiver p.65 Are the batteries dead or have the batteries been inserted Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. correctly? s p.22 Are the remote control ID and the projector ID matched? Make sure the ID for the projector you want to operate and the ID for the remote control match. To operate all projectors by remote control regardless of the ID setting, set the ID switch on the side of the remote control to Off. s p.173 Does Remote Control Type match the remote control that Check the Remote Control Type on the configuration menu. s Extended Menu - Operation - you are using? Remote Control Type p.67 Is the optional remote control cable connected to the remote control or to the projector's Remote port? When the remote control cable is connected, the remote control light-emitting area or the projector's remote receiver are disabled. When not using the remote control cable set, disconnect it from the remote control and the Remote port. Is the remote control button lock set? When the remote control button lock is set, buttons except for those needed for basic remote control operations are deactivated. Hold down the [Help] button to cancel the remote control button lock. s p.47