Epson PowerLite Pro Z8150NL User Manual - Page 112
Interpreting Event IDs, Event ID, Cause, Remedy, Network, Security, Wireless LAN, Wired LAN
View all Epson PowerLite Pro Z8150NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Problem Solving 112 Interpreting Event IDs Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following contact addresses. s p.114 Event ID 0432 0435 0434 0481 0482 0485 0433 0484 04FE 04FF 0891 0892 0893 0894 0898 0899 Cause Failed to startup EasyMP Network Projection. Network communication is unstable. Restart the projector. Remedy Check the status of network communications. Wait for a while and then try connecting again. An image that was transferred cannot be reproduced. Communications was cut off from the computer. EasyMP Network Projection ended unexpectedly. A system error occurred in the projector. The same SSID access point cannot be found. The WPA and WPA2 authentication methods are not the same. The WEP, TKIP, and AES encoding methods are not the same. Communications was cut off because a connection was made to the wrong access point. Failed to obtain the DHCP. Other connection errors Restart EasyMP Network Projection. Check the status of network communications. Restart the projector. Restart the projector. Set the computer, the access point, and the projector to the same SSID. Check the wireless LAN security setting to see if it is correct. s Network Menu Security Menu p.77 Check with the network administrator and follow their instructions. Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is connected correctly. Turn off DHCP if it is not being used. s Network Menu - Wireless LAN Menu p.74, Wired LAN Menu p.81 If the problem cannot be solved by restarting the projector or EasyMP Network Projection, contact one of the following contact addresses. s p.114