Epson PowerLite Pro Z8150NL User Manual - Page 139
Using the tools window, Crestron Control, Projector, Function, Projector Name, Location, Assigned
View all Epson PowerLite Pro Z8150NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
About Crestron RoomView® Using the tools window The following window will be displayed if the Tools tab is clicked in the operation window. This window is used to change the settings in the projector that is currently connected. A Crestron Control Makes settings for Crestron® central controllers. B Projector The following items can be set. Item Projector Name Function Enter a name to differentiate the projector that is currently connected from other projectors on the network. (The name can contain up to 15 single-byte alphanumeric characters.) 139 Item Location Assigned To DHCP IP Address Subnet Mask Default Gateway Send Function Enter an installation location name for the projector that is currently connected on the network. (The name can contain up to 32 single-byte alphanumeric characters and symbols.) Enter a user name for the projector. (The name can contain up to 32 single-byte alphanumeric characters and symbols.) Select the Enabled check box to use DHCP. You cannot set static IP addresses if DHCP is enabled. Enter the IP address to assign to the currently connected projector. Enter a subnet mask for the projector that is currently connected on the network. Enter the gateway address for the currently connected projector. Click this button to commit changes made to the Projector.