Epson PowerLite Pro Z8150NL User Manual - Page 83
AMX Device Discovery, Crestron RoomView, Bonjour, EPSON Message, Broadcasting, Sub Menu, Function
View all Epson PowerLite Pro Z8150NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Network Menu 83 Sub Menu AMX Device Discovery Crestron RoomView Bonjour EPSON Message Broadcasting Function When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discoveryg. Set this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery. Set this parameter to On only when using Crestron RoomView® to monitor and control the projector over a network. Normally, leave this parameter set to Off. s "About Crestron RoomView®" p.136 Changes in projector settings take effect upon restarting. The following functions cannot be used when it is set to On. • Web Control • Message Broadcasting (EasyMP Monitor plugin) To connect to the network by Bonjour, set it to On. For an explanation of the Bonjour service, see the Apple Web site. http://www.apple.com/ You can switch the EPSON Message Broadcasting function to enable or disable. Download the software and the User's Guide from the following website. http://www.epson.com You can download Message Broadcasting and its Operation Guide from the following Web site. http://www.epson.com