Fujitsu DL3700 User Manual - Page 100

USING SETUPMODE DECIDING WHICH OPTIONS TO CHANGE The previous page shows a printout of the printer's factory default settings. In this printout, options are listed by functional group: • Menu 1 settings (MENU1 function) • Menu 2 settings (MENU2 function) • Hardware settings (HARDWRE function) • Print position adjustment settings (ADJUST function) • Configuration settings (CONFIG function) Most selectable options only alter print features, such as the typestyle, page format, and color selection. However, some options must be selected correctly for the printer to work properly with your hardware and software. For each function, Table 5.2 lists items whose options must be selected correctly for system and printer accessory compatibility. Table 5.2 Required Options Function Item Option MENU1 EMULATE The emulation selected on the printer must be the same as the emulation .- 00, selected in your software. If you selected an emulation when you set up the printer (Chapter 2), you do not need to change the EMULATE option unless you want to change to a different emulation. The emulation assigned to MENU1 is the default when you turn the printer on. See the section Changing MENU1 and MENU2 Options later in this chapter. MENU2 None Ifyou use MENU2, the emulation selected for MENU 2 must be the same as the emulation select/NI in your software. See the section Changing MENU1 and MENU2 Options later in this chapter. 5-1.2 User's Manual