Fujitsu DL3700 User Manual - Page 117

Users Manual USING SETUPMODE Table 5.4 HARDWREItems and Options (Cont.) NOTE: Underlined options are the factory defaults. HARDWRE Items Options BI-DIR UNI-DIR Description Bidirectional printing. The printer prints in either direction while seeking the next print direction for a shorter print time. Unidirectional printing. Unidirectional printing is used for printing vertical lines in tables even if vertical alignment is not adjusted. Unidirectional printing is slower than bidirectional printing. ON OFF Enables or disables the printer status bii77en Buzzer on (recommended). The printer beeps to indicate paperout or other conditions. Buzzer off under any conditions. 8 Brr 7 BIT To determine the required word length, refer to your computer documentation. Select 8-BIT to print bit image graphics. 8-bit word length (used by most computers) 7-bit word length (MSB = 0) Assigns buffer memory to input data and downloaded font data. NONE 256BYTE 2KBYTE 8KBYTE 24KBYTE 32KBYTE 128KBYT Print buffer 0 byte 256 bytes 2K bytes 8K bytes 24K bytes 32K bytes 128K bytes Download buffer 128K bytes 127.75K bytes 126K bytes 120K bytes 104K bytes 96K bytes OK bytes 5-29