Fujitsu DL3700 User Manual - Page 98

USING SETUP MODE PRINTING A UST OF SELECTED OPTIONS The LIST function prints a list of all the printer's currently selected options. This function is useful for checking the printer settings when you first enter setup mode or just before you exit. To print a list of options, load continuous forms paper and then proceed as follows: 1. Enter setup mode. Now Press the FONT button and the MENU button simultaneously until the printer beeps. Wait for the printer to stop printing and check that the following «FUNCTION» menu is printed: «FUNCT ION» SAVE &END MENU1 V-ALMNT MENU2 HARDWRE ADJUST CONE I G DEFAULT LIST SELF- TST HEX-DUMP 5.10 2. Select the LIST function. Repeatedly press the LOCK button to position the red cursor under LIST. Next press the FONT button or the MENU button to select the LIST function. The printer starts to print a list of the currently selected options. The preselected factory settings, a: called factory defaults, are shown on the opposite page. When the printer finishes printing the list of options, it reprints the «FUNCTION» menu. NOTE To remove the printout, turn the platen knob until the paper can be torn off at the perforation. In setup mode, you cannot use the printer tear-off feature (TEAR OFF button). 3. Do either of the following: • Select another function, or • Exit setup mode, saving any changes you made. For details about other functions, see the other sections in this chapter. To exit setup mode and save your changes, make su that the red cursor is positioned beneath SAVE & END, then press the FONT button or the MENU button. User's Manual