Fujitsu DL3700 User Manual - Page 85

1 11111P' User's Manual PRINTING To resume printing, press the ONLINE button again. To cancel printing, use the cancel commands provided by your software or computer. To dear the print buffer, place the printer offline and press the LOCK and FONT buttons. Any data sent to the print buffer before you canceled printing will be lost. Resuming from a Paper-Out The printer can "sense" when paper runs out. Depending upon how PPR-OUT (paper-out) is set in setup mode, the printer either: • Stops printing and lights the red PAPER OUT indicator, or • Continues printing until no more data remains in the printer. See Chapter 5 for details on setting PPR-OUT. The factory default is to stop printing if continuous forms paper runs out and to continue printing if single sheet paper runs out When the cut sheet feeder runs out of paper, the printer always stops printing, regardless of the PPR-OUT setting. To resume printing when paper runs out, use either of the methods described below: Printing the remaining lines on a page This method is convenient to continue printing under the paper-out 5 condition, but is not available when the cut sheet feeder is used. 1. Press the ONLINE button. The printer returns to online mode, prints or feeds one line, and the PAPER OUT indicator lights up again. 2. Repeat this procedure until the full page is printed. Line spacings, however, may be uneven. 4-7