Fujitsu DL3700 User Manual - Page 74
PAPER, HANDLING, Micro, Position, Adjust, SWITCHING, TYPES
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
PAPER HANDLING SWITCHING PAPER TYPES Micro Feed Use the micro feed function to fine tune the position of the paper. This function is valid when the printer is offline. Press the ONLINE and LF/FF buttons simultaneously to micro-feed paper forward. Press the ONLINE and TEAR OFF buttons simultaneously to micro-feed paper backward. NNW Remember that the top-of-form will slip from the original setting. Load Position Adjust Use also the micro feed function to adjust the load position of the paper. This function is valid when the printer is offline. When this function is used immediately after the LOAD button is pressed, the adjusted position is retained as the new load position until the power is turned off. Pressing the ONLINE and LOAD buttons simultaneously saves the new position permanently. If you have more than one type of job, it is often necessary to switch between continuous forms and single sheets. This section explains how to switch between paper types. It is not necess,ary to remove the continuous forms paper from the printer. This function is not available for pull-tractor feed. NOTE This function is not available for continuous forms paper that is fed by the pull-tractor. 3-24 User's Manual