Fujitsu DL3700 User Manual - Page 101
USING, SETUP, Table, Required, Options, Cont.
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
USING SETUP MODE Table 5.2 Required Options (Cont.) Function Item Option HARDWRE FORMAT BAUD-RT PROTOCL DSR DUPLEX Ifyou have a serial interface, the serial interface options selected on the printer must be the same as the settings you selected using your software or your computer operating system. If the settings are not the same, the printer will not print or will print garbage. See the section Changing Hardware Options later in this chapter. ADJUST None If you are not using software to specify the top margin of the page, use the printer's default top-of-form setting, 1 inch (25.4 mm) from the top of the paper. If you are using software to specify the top margin of the page, change the default setting to1/6 inch (42 mm). See the section Changing Print Position Adjustment Options later in this chapter. CONFIG None If you are using paper that is dark-colored or preprinted with dark colors, you may need to disable the AREA OVER detection function. See the section Changing Configuration Options later in this chapter. apovi dnies User's Manual 5-13