Fujitsu DL3700 User Manual - Page 97

User's Manual USING SETUP MODE Points to Remember • Load continuous forms paper before entering setup mode. In setup mode, the LF/FF button cannot be used to feed paper. To adjust the line position of paper in setup mode, use the platen knob. • Whenever you enter setup mode, short help menus are printed at the top of the page. Help menus are also printed when you select the SELF-TST, HEX-DUMP, or V-ALMNT functions. Use help menus for quick reference while in setup mode. • When printing the items and options for each function, you can only print one item at a time. However, you can move either forward or backward in the item list. To move forward (print the next item), press the FONT button. To move backward (print the previous item), press the MENU button. • While in the «FUNCITON» menu or when selecting a function that contains items and selectable options, press the ONLINE button to reprint the «FUNCTION» menu. • A short underline under the first two letters of an option indicates that it is the current default setting. For example, 12 CPI indicates that 12 characters per inch is the default pitch. To change the default, select and save a new pitch setting. • While in setup mode, you can use the LIST function to print out a list of the currently selected options (see the next section for details). • To exit setup mode and permanently save your changes, select either the SAVE & END function. For details, see the section Exiting and Saving later in this chapter. To exit setup mode ct) CD without saving your changes, turn the printer off. Your previous power-on defaults are active when you turn the printer on again. 5-9