Fujitsu DL3700 User Manual - Page 18
Operation, performed, printer, state., cannot, apply., Enter, setup, Press, MENU.
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
QUICK REFERENCE Printer Operations (Normal Mode) : Operation can be performed when the printer is in this state. - : Operation cannot be performed when the printer is in this state. N/A : Does not apply. Operation Clear print buffer Eject single sheets Enter normal mode Enter setup mode Exit to normal mode Form feed (forward) Ignore font commands from CPU Line feed (forward) Load paper Micro feed (backward) Micro feed (forward) Place printer offline Place printer online Reset power-on defaults Resume printing after paper end Save adjusted load positions Select a font (and pitch) Select MENU1 or MENU2 Start/stophesume printing Self-test printing Tear off forms (rear-fed continuous forms only) Unload paper to park position (rear-fed continuous forms only) Online Offline Required Response - V Press LOCK and FONT. V V Press LF/FF. N/A N/A Turn printer on. (Press 1 on the power switch.) - -N1 Press FONT and MENU. - V Press ONLINE. -4 -4 Press and hold LF/FF until the operation starts. - V Press LOCK V V Press LF/FF within three seconds. V V Press LOAD. - V Press ONLINE and TEAR OFF. - V Press ONLINE and LF/FF. V - Press ONLINE. - V Press ONLINE. V 4 Turn printer off, then on. _J V - Press ONLINE. - V Press ONLINE and LOAD. - V Press FONT. - V Press MENU. V - Start: Send print command. Stop/resume: Press ONLINE. V V Start Turn printer off. Press LF/FF while turning printer on. Pause/resume: Press FONT or MENU. Exit: Press ONLINE. V V Press TEAR OFF. Tear off forms, then press any button to retract forms. V -4 I Press LOAD. QR-2 User's Manual