Fujitsu DL3700 User Manual - Page 215
interface.
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
goy' User's Manual INTERFACE INFORMATION Host TD (Pin 2) RD (Pin 3) DSR (Pin 6) DTR (Pin 20) RTS (Pin 4) -# CTS (Pin 5) CD (Pin 8) SG (Pin 7) 5 0 Printer TRDD # DSR DTR (RC) # RTS # CTS # CD SG # indicates an open wire. Wire 0 is unnecessary for the DTR (or RC) protocol. Some computers may not require wire 0. DSR-enabled control enables communication using an RS-232C interface. The CTS and DSR input control signals are enabled; CD is ignored. DSR must be high when the printer receives data. If the printer has data to be transmitted to the computer, the printer transmits the data when both DSR and CTS are high. When using DSR-enabled control, use a straight-through cable to connect to a DCE (data communications equipment) device. Use a null-modem cable to connect to a DTE (data terminal equipment) device, as shown below. Host (DTE) TD (Pin 2) RD (Pin 3) DSR (Pin 6) ( DTR (Pin 20) RTS (Pin 4) CTS (Pin 5) 4 CD (Pin 8) A SG (Pin 7) >< • Printer (DTE) TD RD ) DSR DTR A RTS • ) CTS > CD SG D-7