Fujitsu DL3700 User Manual - Page 103

User's Manual USING SETUPMODE Table 5.3 MENU1andMENU2Items andOptions NOTES: • Underlined options are the factory defaults. • Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table. MENU1 and MENU2 Items Options Description DPL24C+ XL24E ESC/P2 Select the same emulation as is selected in your software. See the section Selecting an Emulation in Chapter 2 for information on selecting an emulation. Fujitsu DL-series printers (DPL24C PLUS command set) IBM Proprinter XL24E printers Epson printers using the ESC/P2 command set NOTE When you change the emulation, all MENU1 or MENU2 options are reset to the factory defaults for that emulation. For each of the following fonts, the recommended pitch settings are given after the font name. When you change the font, be sure to also change the pitch, if required. COUR 10 Courier, 10cpi PRSTG12 Prestige Elite, 12cpi COMPRSD Coipressed font, 15,17,and 18cpi BOLDFCE Boldface, Proportional PICA10 Pica, 10cpi CORRESP Correspondence ,10cpi OCR-B OCR - B, 10cpi CD COUR-N Courier Normal, 10cpi COUR-B Courier Bold, lOcpi COUR-I Courier Italic ; 10cpi 0 N.SAN-N Nimbus Sans Normal, Prop. Q. CD NSAN-B Nimbus Sans Bold, PrOp. N.SANJ Nimbus Sans Italic, Prop. 5-15