Fujitsu DL3700 User Manual - Page 238

GLOSSARY OF TERMS Carriage return (CR) Centronics interface Column Command set Condensed print Continuous forms Control panel cpi cps Cut sheets Cut sheet feeder Defaults GL-2 The return of the print head carriage to the beginning of the next line. A type of parallel interface. See Parallel interface. A vertical section on a printed page. This printer can print 136column pages at 10-pitch (10 characters per inch). A set of print and format commands used to control the printer. Each printer has its own resident command sets embedded in the printer firmware. These command sets are actuated by codes sent from the host computer. Print that uses "condensed" characters. Condensed characters are narrower than regular characters. Using condensed print increacs the number of characters per line. Connected, fan-folded sheets of paper that are fed into the printer using forms tractors. The fan-folded sheets are separated by tearing them at their perforations. A panel containing the printer indicators and buttons. The conti panel is used to control printer operations, such as loading paper, selecting print features, and changing setup options. Characters per horizontal inch. Also referred to as pitch. For example, 12-pitch means 12 cpi. Characters per second. See Single sheets. An option that replaces the cut sheet stand. The cut sheet feeder allows automatic loading from a stack of paper. Settings selected automatically by the printer when power is turned on. Enter setup mode to change the defaults to ensure compatibility with your system hardware and software. User's Manual