Fujitsu DL3700 User Manual - Page 94

USING SETUP MODE To select an option from the menu: 1. Repeatedly press the LOCK button to position the red cursor on the plastic print guide under the option you require. 2. Press the FONT button to select the option. The printer prints the next item and its options. You can press MENU to select the option. Then, the printer prints the previous item and its options. 3. After selecting the desired options, press the ONLINE button to reprint the «FUNCTION» menu. For each item, the short-underlined option is the current default option (the option currently saved in the printer's permanent memory). In the previous example, the default options are Fujitsu DPL24C PLUS emulation, Courier 10 font, and letter print quality. The chart on the next page summarizes how to select options such as emulation, font, and print quality and how to use functions that do not have options. Setup Mode Example Nage To become familiar with setup mode, try the following example. This example shows how to change the font and pitch in MENU2 to Prestige Elite 12 and 12 cpi. 1. Load continuous forms paper. 2. Enter setup mode. Press the FONT and MENU buttons simultaneously until the printer beeps. 3. Select the MENU2 function. Wait for the printer to stop printing and press the LOCK button twice to position the red cursor on the print guide under MENU2. Press the FONT button or the MENU button to select the MENU2 function and print the item and its options_ 5-6 Users Manual