Fujitsu DL3700 User Manual - Page 195

COMMAND SETS IBM PROPRINTER XL24E EMULATION User's Manual This section describes the printer commands for the IBM Proprinter XL24E emulation. Asterisks in the "Function" column indicate extended commands that are not supported by the original printer. See the Programmer's Manual (IBM XL24E Emulation) for detailed information on using these commands. Function Print Mode Control Double-strike (bold) printing on Double-strike (bold) printing off Emphasized (shadow) printing on Emphasized (shadow) printing off One-line double-width characters on One-line double-width characters off Double-width characters on/off (on: n =1, off: n = 0) Double-height/double-width characters ni = 4,n2= 0, mi = 0, m2= 0 m3 controls character height and line spacing: m3 Height Spacing 0 Unchanged Unchanged 1 Normal Unchanged 2 Double Unchanged 16 Unchanged Single 17 Normal Single 18 Double Single 32 Unchanged Double 33 Normal Double 34 Double Double m4 controls character width: m4 Width 0 Unchanged 1 Normal 2 Double Command ESC G ESC H FcC E ESC F SO or ESC SO DC4 ESC W (n) ESC I @ (n1) (n2) (mi) - ( 74) C-17