Fujitsu DL3700 User Manual - Page 202
Command, Esc/p2
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
COMMAND SETS (ESC/P2) C-24 Function Command Set character pitch to (n1 + n2x 256)/360 inch (0 5711 5 255)(05 n2 54) Select character pitch (specify unit o pitch) n1 = 1,n2 = 0 d =10 to 19: 10/3600 inch = 1/360 inch d = 20 to 29: 20/3600 inch =1/180 inch d = 30 to 39: 30/3600 inch = 1/120 inch d = 40 to 49: 40/3600 inch = 1/90 inch d = 50 to 59: 50/3600 inch= 1/72 inch d = 60 to 69: 60/3600 inch = 1/60 inch ESC c (n1) (n2) ESC ( U (n1) (n2) (d) vow Vertical Control Line feed Form feed Advance paper n/180 inch (1 ≤ n ≤ 255) Set line spacing to 1/8 inch Set line spacing to n/180 inch (0 ≤ n ≤ 255) Set line spacing to n/60 inch (0 ≤ n ≤ 127) Set line spacing to 1/6 inch Set line spacing to n/360 inch (0 ≤ n ≤ 255) LF FF ESC J (n) ESC 0 ESC 3 (n) ESC A (n) ESC 2 ESC + (n) Tabulation Horizontal tab execution Set horizontal tabs The values of nito nk in this command are the ASCII values of the print columns (at the current character width) at which tabs are to be set. (1 5n5.255)(15k532) Move print position n/120 inch (for draft)) or n/180 inch (for letter) right from left margin (n = n1 + n2 x 256) Move print position n/120('') inch (for draft) or n/180r1) inch (for letter) left or right from the current position (n= ni + n2 x 256) Vertical tab execution HT ESC D (n1) ... (nk) NUL ESC $ (n1) (n2) ESC \ (n1) (n2) VT 1 The value depends on the pitch set by the ESC U command. User's Manual