Fujitsu DL3700 User Manual - Page 45

%or Users Manual SETTING UP Here are some points to help you determine which emulation to select Determine which emulations your software support≤,. (Refer to your software documentation.) Since most software programs support this printer, try to run a program with the factory default emulation first (DPL24C PLUS emulation is the factory default.) Try this emulation even if you are not sure of which emulation to choose. See Chapter 5 for detailed information about how your printer communicates with your software. If you are using more than one software package, determine which emulation is supported by the software you use most frequently. Select that emulation. CcDn If your software supports more than one emulation, select the 5 DPL24C PLUS emulation if possible. This emulation has the greatest capabilities. .N/ If you want to use an emulation that is not supported. by your software, contact your software manufacturer or printer dealer and ask whether support is available. You may be able to obtain a printer driver that is not shipped with the original software package. To select an emulation, proceed as follows: 1. Turn the printer on and load a sheet of paper. To change a single printer setting, such as the emulation, you can use a single sheet paper. To change several printer settings as described in Chapter 5, you must load continuous forms paper. See Chapter 3 for paper loading instructions. 2-23