Fujitsu DL3700 User Manual - Page 37

SEMNG UP 2. Raise the cut sheet stand. Move the left paper guide all the way to the right Insert the sheet of paper into the cut sheet stand. Letter or A4 size paper, inserted lengthwise (portrait mode) with this setting, will not result in clipping. Adjust the right paper guide so that the paper lies flat on the cut ter' sheet stand. 3. Slide the paper along the cut sheet stand until its bottom edge touches the platen. Then press the LOAD button. The paper will be loaded to the top-of-form position. cD Printing the Self-Test 3 c The printer has a built-in self-test program. The self-test prints the firmware version, the names of the printer's resident emulations, and all of the characters available in the emulations. The self-test prints 80 characters per line. If you are using a color printer and ribbon, printing is in seven colors. To print a self-test page, make sure that a sheet of paper is loaded. Then proceed as follows: 1. Turn the printer off. 2. While pressing the LF/FF button, turn the printer back on. Keep the LF/FF button pressed until the printer beeps. Self-test printing will start User's Manual 2-15