Fujitsu DL3700 User Manual - Page 36
TESTING, PRINTER, OFFUNE, Loading, Paper, sheet, paper
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SETTING UP TESTING THE PRINTER (OFFUNE) At this point, load paper and run the printer self-test. The self-test checks printer performance and print quality before you connect the printer to the computer. Use either single sheets or continuous forms (see Chapter 3). This section describes the self-test procedure using single sheets. Loading Paper for the Self-Test To print the self-test, use paper wider than 215.9 mm (8.5 inches) and set the left paper guide all the way to the right to avoid dipping the test pattern. Standard letter or A4 size paper can be used lengthwise (portrait mode). Before loading paper, make sure that the printer is on. Then, proceed as follows: 1. Make sure that the paper thickness lever (located on the top right of the printer) is at position 1. Make sure that the paper select lever (located on the top left of the printer) is set to the front, as shown below. LOAD Loading a sheet ofpaper 2-14 User's Manual