Fujitsu DL3700 User Manual - Page 76
Switching, Continuous, Forms, PAPER, HANDLING, General, Multipart
View all Fujitsu DL3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
PAPER HANDLING Switching to Continuous Forms To switch from single sheets to continuous forms: 1. If a sheet of paper is loaded, remove the paper by turning the platen knob or pressing and holding down the LF/FF buttor CAUTION Failure to remove paper may cause a paper jam. 2. Move the paper select lever to the rear to the continuous forms position. 3. Press the LOAD button. The continuous forms paper advances to the top-of-form position. You are now ready to print using continuous forms paper. • TIPS ON PAPER HANDLING General Tips • Use high-quality paper. Do not use paper that is wrinkled c curled at the edges. • Do not use paper with staples or metal parts. • Do not use paper with unpredictable variations in thickness, such as paper with partial multilayers, paper with embossed printing, and labels with the backing sheet exposed. • Store paper in a dean, dry environment. Multipart Forms • Avoid using carbon-interleaved single sheets if possible. Printing tends to become misaligned on the bottom sheet. • To ensure smoother feeding of paper-stapled, multipart forms, raise the cut sheet stand to support the forms. 3-26 User's Manual