Garmin G500 Pilots Guide - Page 108

Foreword 3.4.1.2 Airspeed Reference Marks The Best Glide, Vr, Vx, and Vy airspeed reference marks for the PFD are adjusted with this function. A marker will appear on the PFD Airspeed tape at the selected speed when the value is set to "On." Default reference airspeeds are set during installation. When power is cycled, the values you set will be retained. System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Figure 3-67 Airspeed References shown on PFD when activated 1) While viewing the System Setup page of the AUX page group, press the small MFD knob to activate the cursor. Turn the large MFD knob to highlight the desired Airspeeds value. 2) Turn the small MFD knob to select the value and press ENT. 3) The On/Off setting will now be highlighted. Turn the small MFD knob to select On or Off and press ENT. The next value will be highlighted. 3-44 Garmin G500 Pilot's Guide 190-01102-02 Rev. B Index Appendix B