Garmin G500 Pilots Guide - Page 64

Foreword System Sec 1 PFD Sec 2 MFD Sec 3 2.8.2 Temperature Display The Outside Air Temperature (OAT) is displayed to the left of the HSI. The OAT can be displayed in ºF or ºC, which is configured in the Aux System Setup Page. The temperature is derived from the Temperature Probe on the aircraft. The displayed temperature is the Static Air Temperature reported by the Air Data Computer. This temperature value is corrected for ram air heating effects. Figure 2-35 HSI Outside Air Temperature 2.9 Wind Vectors When selected, wind vector information is displayed in a window on the PFD to the left of the HSI. The Wind Vector style is configured in the Aux Mode System Setup page. While on the ground, the Wind Vector window will indicate "No Wind Data." Figure 2-36 Wind Vector with No Wind Data Four styles are available as shown below. Style 1 Style 2 Style 3 Style 4 Figure 2-37 Wind Vector Style Features Avoidance Hazard Sec 4 Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Index Appendix B 2-24 Garmin G500 Pilot's Guide 190-01102-02 Rev. B