Garmin G500 Pilots Guide - Page 38
Dual GDU 620 Installations - installation manual
View all Garmin G500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Foreword Manual Adjustment 0.1% to 50% or Auto (1.7%) Auto or Manual System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Additional Sec 5 Figure 1-22 Display Brightness Adjustment 3) Turn the large MFD knob to highlight the MODE field. Turn the small MFD knob to select "AUTO" or "MANUAL." 4) Press ENT. 1.3.5 Dual GDU 620 Installations Dual GDU 620 units when connected in the aircraft may be set up to communicate and share information by "Crossfilling" or synchronizing information between the two units. 1.3.5.1 Crossfill Information The following information is always synchronized between both GDU 620 units: • Selected Altitude • Selected Heading • Selected Course • Selected Vertical Speed • Airspeed Bug Values • Airspeed Color Band Values • System Pressure Units • System Temperature Units The following information can be synchronized between GDU 620s, or changed independently, depending on the Crossfill Synchronization Settings: • Barometric Correction (default ON) • Selected CDI (default OFF) When Barometric Correction is synchronized, any changes to the Barometric Setting on either GDU will change it on both GDUs. & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Index Appendix B 1-22 Garmin G500 Pilot's Guide 190-01102-02 Rev. B