Garmin G500 Pilots Guide - Page 145

Foreword Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features 4.5.2 Altitude Display Changing the altitude display mode 1) While viewing the Traffic page of the MAP page group, press the OPERATE soft key to begin displaying traffic. "TAS OPERATING" is displayed in the Traffic mode field. 2) Press the ALT MODE soft key to change the altitude volume. Select the desired altitude volume by pressing the BELOW, NORMAL, ABOVE, or UNREST (unrestricted) soft keys. The selection is displayed in the Altitude mode field. Altitude Mode Below Normal Above Unrestricted Displayed Traffic Range -9700 ft to 2700 ft -2700 ft to 2700 ft -2700 ft to 9700 ft All Traffic Shown Table 4-5 Displayed Traffic Range 3) Press the STANDBY soft key to place the system in the Standby mode. OR 1) Press the MENU key. 2) Turn the small MFD knob to select one of the following: • BELOW • NORMAL • ABOVE • UNREST (unrestricted) 3) Select the ENT key. Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index 190-01102-02 Rev. B Garmin G500 Pilot's Guide 4-17