Garmin G500 Pilots Guide - Page 57
Changing CDI Sources
View all Garmin G500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Foreword Sec 1 System Sec 2 PFD Sec 3 MFD NOTE: The ILS Localizer and Glideslope deviation indicators will indicate full-scale deflection for the GNS 480 navigator at the second dot. The GNS 400W/500W series navigators will indicate full-scale deflection at the edge of the display. 2.7.1 Changing CDI Sources The CDI can display two sources of navigation: GPS or NAV (VOR, and LOC). Color indicates the current navigation source: magenta (for GPS) or green (for VOR and LOC). The full-scale limits for the CDI are defined by a GPS-derived distance when coupled to GPS. When coupled to a VOR or localizer (LOC), the CDI has the same angular limits as a mechanical CDI. If the CDI exceeds the maximum deviation on the scale (two dots) while coupled to GPS, the crosstrack error (XTK) is displayed below the white aircraft symbol. GPS Navigator 1 GPS Navigator 2 VLOC Navigator 1 VLOC Navigator 2 Sec 4 Hazard Avoidance Features Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index Figure 2-27 CDI Navigation Sources 190-01102-02 Rev. B Garmin G500 Pilot's Guide 2-17