Garmin G500 Pilots Guide - Page 25

Foreword Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features Inserting an SD Card 1) Insert the SD card in the SD card slot (the front of the card should be flush with the face of the display bezel). 2) To eject the card, gently press on the SD card to release the spring latch. 1.1.14 Pilot Controls The GDU 620 controls have been designed to simplify operation of the system and minimize workload and the time required to access sophisticated functionality. Controls are located on the PFD and MFD bezels and are comprised of a PFD knob, MFD dual concentric knobs, bezel keys, and soft keys. 1.1.14.1 PFD Knob Turning the PFD knob adjusts the values for the mode selected by the PFD bezel keys, such as, Heading (HDG), Course (CRS), Altitude (ALT), Vertical Speed (V/S), and Barometric Setting (BARO). The values are shown in a window to the left of the HSI. Pressing the PFD knob reverts to the default value of the selected mode. Heading Mode Course Mode Altitude Vertical Speed Barometer Mode Mode Mode Figure 1-12 Selection Modes Adjusted with the PFD Knob NOTE: After 10 seconds of inactivity in another mode, the PFD knob selected mode will revert to Heading mode. 1. Press the desired PFD mode selection key (HDG, CRS, ALT, V/S, or BARO). A window will be displayed near the upper right corner of the HSI showing the current value for that mode. 2. Turn the PFD knob to select the desired value. Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index 190-01102-02 Rev. B Garmin G500 Pilot's Guide 1-9