Garmin G500 Pilots Guide - Page 26

Foreword System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 1.1.14.2 PFD Bezel Keys Heading (HDG) Selects Heading Select mode. Pressing the PFD knob in Heading mode will center the Heading Bug on the current Heading. This is the default mode for the PFD knob. If the Heading is invalid, the PFD knob will revert to Course mode. Set the heading on the HSI by turning the PFD knob after pressing the HDG key. Course (CRS) Selects Course Select mode. Pressing the PFD knob in Course mode will center the CDI for a VOR or OBS mode course. Altimeter (ALT) Selects Altitude Select mode. Pressing the PFD knob in Altimeter mode will enter the current altitude in the Altitude Select window. Set the Altitude Bug by turning the PFD knob after pressing the ALT key. Altitude Select Window Altitude Bug Current Altitude Barometric Setting Figure 1-13 Pressing PFD Knob Sets Altitude Select to Current Altitude Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Index Appendix B 1-10 Garmin G500 Pilot's Guide 190-01102-02 Rev. B