Garmin G500 Pilots Guide - Page 122

Foreword System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Ident/Facility/City Selection The current destination Identifier, Facility Type with icon, Facility Name, and City (location) are shown in the top window of the Flight Plan mode Waypoint Information page. The default is the Nearest airport if there is no active flight plan. New Identifiers may also be selected as shown in section 3.5.3.3. Identifier Facility Name City Access (Public/ Private and Symbol) Figure 3-87 Flight Plan Ident/Facility/City Detail 1) While viewing the Waypoint Information page of the FPL page group, press the INFO soft key to view Runway and Frequency information about the waypoint. 2) Press the INFO soft key again to return to the Map view. Runway Information Selection Information is provided for each runway showing the following detail: runway number, runway length, surface type, and the frequency for Pilot-Controlled Lighting (PCL). Runway Number Runway Length & Width Arrow Indicates More Runways Runway Surface Pilot-Controlled Lighting Frequency Figure 3-88 Waypoint Runway Information 1) While viewing the Waypoint Information page of the FPL page group, press the INFO soft key to view information about the waypoint and press the small MFD knob to activate the cursor. 2) Use the large MFD knob to highlight the Runway and use the small MFD knob to display the available runways. 3) Press the small MFD knob to cancel editing. Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Index Appendix B 3-58 Garmin G500 Pilot's Guide 190-01102-02 Rev. B