Garmin G500 Pilots Guide - Page 28

Foreword System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Additional AP Test The AP TEST soft key is available if the GAD 43 is installed and providing attitude to an autopilot. The AP TEST soft key disengages the autopilot as part of the AHRS test. NOTE: "AP TEST" is not available for all installations. CDI The CDI soft key toggles between the selection of GPS or VOR/LOC as the active navigation source. In a single GDU 620 system, the GDU CDI soft key will change the source in the connected navigator and making a source change in the navigator will be reflected in the GDU 620. In a dual GDU 620 system, the CDI keys in the navigator will be disabled. 1-2 The 1-2 soft key toggles between the available receivers for selected navigation source (i.e. GPS1 and GPS2 or VOR/LOC1 and VOR/LOC2). This soft key will only be present if the system is configured for a second GPS or VOR/ LOC. PFD Pressing the PFD soft key displays the BRG1, BRG2, and BACK soft keys. The BRG2 soft key will only be present if the system is configured for a second GPS or VOR/LOC receiver. BRG1 The BRG1 soft key cycles through the available bearing 1 indicator modes (NAV1, GPS1, ADF, or None). BRG2 The BRG2 soft key cycles through the available bearing 2 indicator modes (NAV2, GPS2, ADF, or None). This soft key will only be present if the system is configured for a second GPS or VOR/LOC. SYN VIS The SYN VIS soft key is available if Synthetic Vision Technology™ is installed. It enables Synthetic Vision and displays the associated soft keys. Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Index Appendix B 1-12 Garmin G500 Pilot's Guide 190-01102-02 Rev. B