Garmin G500 Pilots Guide - Page 113

Foreword Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features Sec 5 Additional Figure 3-73 Altitude and Vertical Speed MFD Display Units 3.4.1.7 System Display Units The System Display Units options allows the selection of units to display values for Navigation Angle (Magnetic or True), Barometric Setting (inches or Hectopascals), and Temperature (Fahrenheit or Celsius). Pressing the DFLT UNIT soft key will restore the Default Unit settings. 1) While viewing the System Setup page of the AUX page group, press the small MFD knob to activate the cursor. Turn the large MFD knob to highlight the System Display Units selection titled "Nav Angle." CAUTION: The Nav Angle display units (Magnetic or True) must be set to the same type in both the GDU 620 and GNS navigators. Figure 3-74 Nav Angle System Display Units 2) Turn the small MFD knob to select Magnetic or True and then press ENT. The Barometric Pressure Setting value will now be highlighted. When True is selected, a "T" will appear to the right of the heading value on the PFD. Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index Figure 3-75 Barometric Setting System Display Units 190-01102-02 Rev. B Garmin G500 Pilot's Guide 3-49