Garmin G500 Pilots Guide - Page 204
Vertically Scanning a Storm Cell, CONTROL
View all Garmin G500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Foreword System Sec 1 PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 4.8.6.2 Figure 4-66 Vertical Scan Display Vertically Scanning a Storm Cell NOTE: Vertical scanning of a storm cell should be done with the aircraft wings level to avoid constant adjustment of the Bearing Line. 1) While in the Horizontal Scan view, press the CONTROL and then the BRG soft keys. This displays the Bearing Line. OR Press MENU and turn the large or small MFD knobs to highlight the "Show Bearing Line" menu item and press the ENT key. This displays the Bearing Line. 2) Press the MFD knob to activate the Bearing Line Adjustment in the Control window. Turn the Large MFD knob to highlight the Bearing value. 3) Turn the small MFD knob to place the Bearing Line on the desired storm cell or other area to be vertically scanned. Appendix A Glossary Sec 8 Index Appendix B 4-76 Garmin G500 Pilot's Guide 190-01102-02 Rev. B