Garmin G500 Pilots Guide - Page 72

Foreword System Sec 1 3.3.6 Panning The Panning Map Page function allows you to move the map beyond its current limits without adjusting the map scale and to examine information at the pointer location. When you select the panning function - by pressing the small MFD knob - a target pointer flashes on the map display. A window also appears at the top of the map display showing the latitude/longitude position of the pointer, the ETE from your present position to the pointer, elevation at the pointer, and bearing and distance to the pointer from your present position. ETE from present position to tip of pointer Information is related Elevation at Pointer to the tip of the pointer Lat/Lon at Pointer PFD Sec 2 MFD Sec 3 Features Avoidance Hazard Sec 4 Additional Sec 5 & Alerts Annun. Sec 6 Symbols Sec 7 Appendix A Glossary Sec 8 Map Pointer Present Position Figure 3-8 Navigation Map Pointer Location Information 1) While viewing a Map or Chart page, press the small MFD knob. A flashing pointer will appear in the tip of the ownship symbol. The measured information is referenced to the tip of the arrow. Figure 3-9 Navigation Map Initial Pointer Location 2) Turn the large MFD knob to move the cursor horizontally. Turn the small MFD knob to move the cursor vertically. 3) Press the small MFD knob again to cancel panning. The display will return to the previous map view. 3-8 Garmin G500 Pilot's Guide 190-01102-02 Rev. B Index Appendix B