HP 8550 Service Manual - Page 111
Table 46., Copier, test print mode Level 2 and Level 3 menus, TEST > PG > COLOR Y, M, C, or K.
View all HP 8550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Table 46. Copier, test print mode Level 2 and Level 3 menus Level 2 item PG Level 3 item TYPE TXPH THRU DENS-Y DENS-M DENS-C DENS-K COLOR-Y COLOR-M COLOR-C COLOR-K F/M-SW Description Enter a number and press the Copy Start key to generate a test print. For test print details, see page 110. Switch between text mode and photo mode: 3 = text/photo/map 4 = film photo 5 = printed photo 6 = text/photo 7 = black-and-white text Enable/disable the gate array of the laser controller PCB (0 = disable, 1 = enable). Adjust the density of Y at TYPE=5 (range: 0 to +255). Adjust the density of M at TYPE=5 (range: 0 to +255). Adjust the density of C at TYPE=5 (range: 0 to +255). Adjust the density of K at TYPE=5 (range: 0 to +255). Enable/disable generation of Y for each TYPE (0 = disable, 1 = enable). Enable/disable generation of M for each TYPE (0 = disable, 1 = enable). Enable/disable generation of C for each TYPE (0 = disable, 1 = enable). Enable/disable generation of K for each TYPE (0 = disable, 1 = enable). Switch between full color and mono color for PG generation (0 = full color, 1 = mono color). When set to 1, select the output color under TEST > PG > COLOR (Y, M, C, or K). EN 109