HP 8550 Service Manual - Page 140

CAUTION Note To download the new firmware / language localization using the Service Support Tool 1 From the Service Support Tool main menu, click Continue button under Download/Upload. 2 Select R-CON under ServTool and then select CP660. 3 Click Connect to establish the connection between the computer and the copy module. A reminder screen appears. 4 If the connection has been established, click Continue to start the connection. A progress bar showing the status of the connection appears. If the bar does not show progress, there has been a failure to communicate and an error message/screen should appear. If the connection has not been established, click Return to Previous Menu. 5 When the connection is successfully established, press OK. Do not use options and utilities that allow you to read or write to RAM data. These options are used to back up copy module configuration and calibration data to the computer hard disk. 6 Click Write to Flash ROM. The screen that appears when you click Write to Flash ROM shows several different firmware/language images that have been installed and are available to download. 7 Click the appropriate version/language. The Selected ROM Version section in the lower part of the window will confirm your selection of language, country, and version. 8 Click Start to begin the download process 9 Select version/language. 10 Click Start to begin the programming phase. 11 If you are changing from the original language, a warning appears. Press Start Write Operation to continue, or Go Back if you do not want the selected language. Pressing Start Write Operation will bring up a screen which tracks the status as the Service Support Tool program obtains more information from the original ROM, and as the download progresses. The ROM is erased before it is written to. The information for the previous and new language, country, and firmware version all appear. 138 Chapter 4 - Adjustments and maintenance EN