HP BL25/35/45p HP ProLiant Network Adapter Software and Configuration Guide - Page 56
RXCHECKSUM., Advanced Network Services help - supported keywords, AGG_SELECTION, BALANCE_INTERVAL,
View all HP BL25/35/45p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
0-Driver operates in normal mode 1-Driver operates to reduce the number of spurious interrupts o Default = 1 NOTE: The minimum threshold for acceptable number of spurious interrupts is 200 interrupts per second, which is the default value of the environmental variable "set display spurious interrupt alerts threshold." • RXCHECKSUM. This keyword is used to enable or disable the offload of Receive Packet Checksum verification to the adapter. This automatically loads for 10/100 adapters. o Syntax: RXCHECKSUM=n Where n = 0 or 1 0-Does not offload Rx Checksum verification to the adapter 1-Offloads Rx Checksum verification to the adapter Default = 0 Advanced Network Services help - supported keywords • AGG_SELECTION o Syntax: AGG_SELECTION=[BANDWIDTH | COUNT] o Description: Sets active aggregator selection mode by bandwidth or count • BALANCE_INTERVAL o Syntax: balance_interval=nnn o Description: Changes Balance interval, nnn counts 1/18 sec • BALANCE_SET_DEFAULT o Syntax: balance_set_default o Description: Restores Balance interval to factory settings • COMMIT o Syntax: commit [team=nnn] o Description: Sets a certain mode. Use after binding to base drivers with Team=nnn. • DELAY o Syntax: delay=nnn o Description: Delays the commit in nnn seconds • FRAME o Syntax: frame=[ETHERNET_802.2 | ETHERNET_802.3 | ETHERNET_II | ETHERNET_SNAP] • HELP o Syntax: -H o Description: Displays Help o Example: CPQANS -H • JOIN_INDIVIDUALS o Syntax: join_individuals=[yes | no] o Description: Joins all individual links to one aggregator Configuration and diagnostics 56