HP BL25/35/45p HP ProLiant Network Adapter Software and Configuration Guide - Page 72
Load Q57 Slot=2 Frame=ethernet_snap Name=q57_1_esp
View all HP BL25/35/45p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
• set minimum packet receive buffers = 10000 • set maximum physical receive packet size = 2048 Verifying or modifying adapter properties When an adapter configuration is saved, the NetWare install program adds load and bind statements to the autoexec.ncf file. By accessing this file, you can verify the parameters configured for each adapter, modify them, or enter additional parameters. NOTE: The Novell monitor program and the CONFIG command are also useful for verifying driver configuration. For information on how to use these programs, refer to the utilities reference in your Novell NetWare online documentation. The parameters that can be defined in the load statements are described in NetWare server driver LOAD line parameters for HP server adapters below. A valid autoexec.ncf file is shown below. One set of load and bind commands is added for each frame type the adapter is configured to support. Valid Autoexec.ncf file Set Time Zone = PST8PDT set Daylight Savings Time Offset = 1 set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00 AM) set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00 AM) set Default Time Server Type = SINGLE set Bindery Context = O=LAN # WARNING!! file server name NOVELLSERVER51 # WARNING!! # If you change the name of this server, you must update # all the licenses that are assigned to this server. Using # NWAdmin, double-click on a license object and click on # the Certificate Assignments button. If the old name of # this server appears, you must delete it and then add the # new server name. Do this for all license objects. ServerID 1C8EE2C LOAD ODINEB.NLM LOAD TCPIP LOAD Q57 SLOT=2 FRAME=Ethernet_802.2 NAME=Q57_1_E82 BIND IPX Q57_1_E82 NET=FAFD3D25 LOAD Q57 SLOT=2 FRAME=Ethernet_802.3 NAME=Q57_1_E83 BIND IPX Q57_1_E83 NET=5A2D8D6D LOAD Q57 SLOT=2 FRAME=Ethernet_SNAP NAME=Q57_1_ESP BIND IPX Q57_1_ESP NET=477A35BD LOAD Q57 SLOT=2 FRAME=Ethernet_II NAME=Q57_1_EII BIND IPX Q57_1_EII NET=C3C8F2E4 BIND IP Q57_1_EII ADDR=172.16.1.1 MASK=ff.ff.0.0 mount all SEARCH ADD SYS:\JAVA\BIN SEARCH ADD SYS:\JAVA\NWGFX IMPORTANT: If you modify any adapter parameters, you must reboot the system before the changes will take effect. If you make changes and do not reboot, you may experience configuration problems. Removing drivers from Autoexec.ncf Configuration and diagnostics 72