HP C7769B Service Manual - Page 222
Print Platen, Remove the Cutter Guide - Refer
View all HP C7769B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Removal and Installation Print Platen Removal WARNING Switch off the printer and remove the power cord. NOTE Refer to the table on Page 8-4 for information on screw types. 1. Remove the Cutter Assembly - Refer to Page 8-32. 2. Remove the Cutter Guide - Refer to Page 8-55. 3. Remove the following screws (Type G) from the Print Platen: n 24 Screws (T-8) for the 24" model. n 36 Screws (T-8) for the 42" model. 4. Pull the tabs out slightly and lift each piece of the Print Platen from the Printer. NOTE The Print Platen is split into 2 pieces on the 24" model and into 3 pieces on the 42" model. 8-56 HP DesignJets 500 and 800 Series Printers Service Manual
Removal and Installation
8-56
HP DesignJets 500 and 800 Series Printers Service Manual
Print Platen
Removal
WARNING
Switch off the printer and remove the power cord.
NOTE
Refer to the table on Page
8-4
for information on screw types.
1.
Remove the Cutter Assembly - Refer
to Page
8-32
.
2.
Remove the Cutter Guide - Refer to
Page
8-55
.
3.
Remove the following screws
(
Type G
) from the Print Platen:
n
24 Screws (T-8) for the 24" model.
n
36 Screws (T-8) for the 42" model.
4.
Pull the tabs out slightly and lift each
piece of the Print Platen from the
Printer.
NOTE
The Print Platen is split into 2
pieces on the 24" model and
into 3 pieces on the 42" model.