HP CC567A User Guide - Page 234
Rings, to Answer, Cause, Distinctive Ring, Solution, For more information, see
View all HP CC567A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
labeled 2-EXT, as shown below. You also need to set the correct number of rings to answer for both the answering machine and HP All-in-One. 1 Telephone wall jack 2 Connect to the IN port on the answering machine 3 Connect to the OUT port on the answering machine 4 Telephone (optional) 5 Answering machine 6 Use the phone cord supplied in the box with the HP All-in-One Make sure the HP All-in-One is set to receive faxes automatically and that the Rings to Answer setting is correct. The number of rings to answer for the HP All-in-One should be greater than the number of rings to answer for the answering machine. Set your answering machine to a low number of rings and the HP All-in-One to answer in the maximum number of rings supported by your device. (The maximum number of rings varies by country/region.) In this setup, the answering machine will answer the call and the HP All-in-One will monitor the line. If the HP All-in-One detects fax tones, the HP All-in-One will receive the fax. If the call is a voice call, the answering machine will record the incoming message. For more information on setting up the HP All-in-One, see the printed documentation that came with the HP All-in-One. For more information, see: • "Set the number of rings before answering" on page 62 • "Set the answer mode" on page 62 Cause: You have a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), and the Distinctive Ring setting on the HP All-in-One does not match. Solution: If you have a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), make sure that the Fax troubleshooting 233 Troubleshooting