HP CM3530 HP Color LaserJet CM3530 MFP Series - Analog Fax Accessory 500 Fax G - Page 31

5. Scroll to and touch Blocked Fax Numbers to open the blocked fax menu. 6. Touch Remove Blocked Number to make the keyboard available. 7. Type a number and touch OK. 8. To add additional numbers, repeat steps 5 and 6. Clear all numbers from the blocked-fax list 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Scroll to and touch Initial Setup. 3. Touch Fax Setup. 4. Scroll to and touch Fax Receive Settings. 5. Scroll to and touch Blocked Fax Numbers to open the blocked fax menu. 6. Touch Clear all Blocked Numbers to make the keyboard available. 7. Touch Yes to clear all numbers from the list, or touch No to exit and retain the numbers. Initiate polling receive Some fax machines can hold a fax until another fax machine requests that the fax be sent. When an MFP polls another fax machine that is holding a fax and requests that the held fax be sent to the MFP, this is known as polling receive. 1. On the control panel, touch the Fax icon to display the Fax screen. 2. Touch More Options to display the options screen. 3. Scroll to page 3. 4. Touch Fax Polling to display the Fax Polling screen. 5. Touch the text box to display the keyboard. 6. Using the keypad, type a polling receive number, and then touch Start. 7. The number entered is dialed. If a stored fax is being held at the fax machine dialed, that fax is transmitted to the MFP and printed. If no fax is held, a No Fax is Available message will be displayed. If the fax machine does not support the polling feature, a Poll Invalid error message will be shown. Change notification settings Notification selects when and how you are notified of the status of an outgoing fax. This setting applies to the current fax only. To change the setting permanently, change the default setting. 1. On the control panel, touch the Fax icon to open the Fax screen. 2. Touch More Options. 3. Touch Notification. ENWW Receive fax settings 23