HP CM3530 HP Color LaserJet CM3530 MFP Series - Analog Fax Accessory 500 Fax G - Page 72

Settings in the Resets menu, Administration, Resets - factory reset

Page 72 highlights

to select (negotiate with the other modem) any of the supported baud rates up to 33,600 bps. The Off setting sets the baud rate to 14,400 bps. This setting remains set, until changed. Speaker mode: This service setting has two modes, Normal and Diagnostic. In Normal mode, the modem speaker is turned on during dialing through the initial connection and then shuts off. For Diagnostic mode, the speaker is turned on and remains on for all fax communications until the setting is returned to Normal. Settings in the Resets menu Open the Administration menu, and then select the Resets menu. Resets menu settings Restore Factory Telecom Settings or Restore Default Telecom Settings: This selection resets several menu changes back to their default settings. This includes the maximum baud rate, ring-burst off time, V.34, speaker mode, and transmit signal loss. 64 Chapter 4 Solve fax problems ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

to select (negotiate with the other modem) any of the supported
baud rates up to 33,600 bps. The Off setting sets the baud rate
to 14,400 bps. This setting remains set, until changed.
Speaker mode
: This service setting has two modes, Normal
and Diagnostic. In Normal mode, the modem speaker is turned
on during dialing through the initial connection and then shuts
off. For Diagnostic mode, the speaker is turned on and remains
on for all fax communications until the setting is returned to
Normal.
Settings in the Resets menu
Open the
Administration
menu, and then select the
Resets
menu.
Resets
menu settings
Restore Factory Telecom Settings
or
Restore Default Telecom
Settings
: This selection resets several menu changes back to
their default settings. This includes the maximum baud rate,
ring-burst off time, V.34, speaker mode, and transmit signal
loss.
64
Chapter 4
Solve fax problems
ENWW