HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 105

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCC_LC-6 Error Message FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec]. Explanation The Fibre Channel Congestion Control line card process is active for packets with priority less than or equal to the threshold shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). FCD Messages This section contains the FICON control device (FCD) messages. FCD-7 Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange[hex] from vsan:[dec] ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars] state:[chars]:[dec]. Explanation SB3 aborted exchange due to the reason given. Aborts are caused by either the channel or control unit detecting a device protocol error. Recovery actions are performed to restore communication. In certain circumstances aborts occur in normal operations. Recommended Action No action is required if communication with FICON control device is still operational. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCDD Messages This section contains the Fibre Channel device discovery (FCDD) messages. FCDD-SLOT#-3 Error Message FCDD-SLOT#-3-LOG_FCDD_ERR: Nonrecoverable error - exiting: [chars]. Explanation Errors caused the program to exit. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-69