HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 510

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-3-ZS_ACTIVATION_FAILED_DUE_TO_QOS_DISABLED: Activation failed due to qos not enabled. Explanation Activation of zone set failed because QoS was not enabled. Recommended Action Make sure QoS is enabled and reactivate the zone set in the VSAN. Introduced Cisco MDS SAN-OS Release 2.0(1b). ZONE-4 Error Message ZONE-4-LZ_OTHER_CMD_TO_ZONED_OUT_LUN: FCP command [hex] received from SID=[chars] to DID=[chars] for LUN=[chars]. Explanation The LUN read-only zoning process has received. FCP command received from the source ID to the destination ID for a zoned out LUN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-4-ROZ_WRITE_ACCESS_TO_READ_ONLY_LUN: FCP command [hex] received from SID=[chars] to DID=[chars] for LUN=[chars]. Explanation The LUN read-only zoning process has received an FCP command from the source ID to the destination ID for a zoned out LUN. Explanation No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-4-ZS_BROADCAST_LUN_WARNING: LUN member(s) and Broadcast attribute are present in zone [chars] in vsan [dec]. Broadcast violations can occur for LUN members. Explanation Broadcast violations can happen in the named zone in the named VSAN because it has LUN zone members. Recommended Action No action is required. Error Message ZONE-4-ZS_CHANGE_LC_UPGRADE_IN_PROGRESS: Change protocol request is received from domain [dec] when linecard upgrade is in progress. Explanation A change request has been received from the domain when a line card upgrade is in progress. The change request is rejected. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-474 Cisco MDS 9000 Family System Messages Reference OL-15956-01