HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 491

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-3-STARTUP_COPY_TO_RUNNING_FAILED: [chars]. Explanation Could not snapshot Startup-Config PSS to Running-Config. The description of error is [str.]. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release. Error Message WWN-3-TOOMANY_REQ_REL: WWNs [chars] = [dec] ] Explanation The WWN manager received a request to allocate a number of WWNs that is more than the maximum number of WWNs that can be allocated or released in a single request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-UNKNOWN_MSG: Received from Node=[dec] SAP=[dec] Opcode=[dec]. Explanation The WWN manager has received an unknown message from the node and SAP with opcode shown in the error message. This information is for debugging only. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). WWN-4 Error Message WWN-3-WWN_PSS_CORRUPTED: [chars] PSS found corrupted. Explanation The WWN manager has detected corruption in one of its persistent information databases. The database was recreated. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-4-PSS_SUP_CNT_MISMATCH: PSS [dec] Bkpln [dec]. Explanation The WWN manager has detected that some other supervisor module was plugged in earlier on this chassis. This WWN manager is making sure that newly allocated WWNs do not conflict with WWNs that could have been allocated by the previous supervisor module. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-455