HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 512

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active zoneset present on VSAN [dec] in interoperability mode. Explanation Active zone set has non-interoperable members (FC ID, FWWN) when interoperability mode is turned on for the VSAN. Recommended Action Turn off interoperability mode or make sure that active zone set has only interoperable members (pWWN). Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-4-ZS_QOS_LUN_WARNING: LUN member(s) and QoS attribute are present in zone [chars] in vsan [dec]. QoS will not be applicable for LUN members. Explanation QoS will not be applicable to LUN zone members in zone [chars] in vsan [dec]. Recommended Action No action is required. ZONE-5 Error Message ZONE-4-ZS_TOO_MANY_ALIAS_IN_CURRENT_INTEROP_MODE: Too many aliases in current interoperability mode. Explanation Too many aliases configured in current interoperability mode on the VSAN. Because of this, the next zone set activation, distribution, or merge operation may fail. Recommended Action Either set the interoperability mode to the appropriate value, or make sure the number of aliases is less than the maximum allowed in the current interoperability mode. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-4-ZS_UNSUPPORTED_MEMBER_IN_CURRENT_INTEROP_MODE: Unsupported member present in active or full zoneset in current interoperability mode. Explanation Active or full zone set has members that are not supported in the current interoperability mode set on the VSAN. Recommended Action Either set the interoperability mode to the appropriate value, or make sure that the active or full zone set has only supported members in the current interoperability mode. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message ZONE-5-ZS_EXPORT_IMPORT_COMPLETE: [chars] operation completed. Explanation The export or import operation completed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-476 Cisco MDS 9000 Family System Messages Reference OL-15956-01