HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 149

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FICON-6 Error Message FICON-6-PDCM_CHANGE: VSAN [dec] port-address [dec] prohibit mask set to [chars]. Explanation The FICON prohibit dynamic connectivity mask (PDCM) for this port has changed. The VSAN port address PDCM is now set to the value shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message FICON-6-PORT_SWAP: port number [dec] [dec] swapped. Explanation FICON port numbers swapped. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message FICON-6-VSAN_DISABLED: FICON disabled on VSAN [dec]. Explanation FICON has been disabled on the VSAN shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message FICON-6-VSAN_ENABLED: FICON enabled on VSAN [dec]. Explanation FICON has been enabled on the VSAN shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). FLOGI Messages This section contains the fabric login (FLOGI) messages. FLOGI-5 Error Message FLOGI-5-MSG_IF_REINIT_ALPA_CONFLICT: [VSAN [dec], Interface [chars]] FL/TL interface [chars] re-initialized as ALPA - PWWN map conflict occurred. Explanation The FL or TL interface reinitialized as an arbitrated loop physical address (ALPA) and now conflicts with an existing fabric login (FLOGI) session after the Loop Initialization Protocol (LIP). All devices will log in again with new ALPA and pWWN mapping. Recommended Action No action is required. OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-113