HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 211

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IVR-3-DOMAIN_DISALLOWED_IN_INTEROP: Device with port WWN [chars] and FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec] is disallowed in the interop mode for VSAN [dec]. Explanation VSAN interop modes place restrictions on what domain ranges are allowed. This domain is out of the range allowed for this interop mode. Refer to the Cisco MDS 9000 Family CLI Configuration Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details on the domain range limitations. Recommended Action Change the domain of the switch to which this IVR zone member is connected so that it is within the allowed domain list for the interop mode. The domain identifier can be statically assigned using fcdomain interface. You can also configure a range of domains allowed in a VSAN using the fcdomain allowed-domains' interface.' Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IVR-3-DOMAIN_UNAVAILABLE: Device with port WWN [chars] and FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec] is already assigned in VSAN [dec]. Explanation Device with the named port WWN and FC ID may not be able to participate in Inter-VSAN zone because the named domain is already assigned in the named VSAN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IVR-3-FC2_ERROR: FC2 API [chars] failed with error [hex] for [chars]. Explanation IVR invoked a Fibre Channel Layer 2 (FC-2) API for a socket and received an error code. The error message describes the API and the error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message IVR-3-INTERNAL_ERROR: Internal error: [chars]. Explanation The IVR process encountered a general error, one that does not fall in any of the categories. The error message describes the error and its context. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message IVR-3-FCID_REWRITE_REQUEST_TO_ACL_FAILED: fcid rewrite [chars] request vsan [dec] did [chars] sid [chars] failed:[chars]. Explanation This happens either after IVR retried the request few times or ACL experienced error while processing the request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-175