HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 62

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message CFS-2-GENERAL_ERROR: [chars]. Explanation The Cisco Fabric Services process has encountered a critical error. The description of error is shown in the error message. Recommended Action Refer to the listed error and take action as required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-2-INITFAIL: CFS Service Init failed: [chars]. Explanation The Cisco Fabric Services initialization failed. The error message explains the reason for the failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-2-LOCK_FAILED: lock failed for sap [dec] due to internal error. Explanation Lock failed because the unrestricted and uncoordinated count is not zero for an application with the service access point (SAP) shown in error message. Recommended Action To recover from this state, use the cfs internal decrement-unrestricted CLI command. Introduced Cisco MDS SAN-OS Release 3.0(2a). Error Message CFS-2-MALLOC_ERROR: Size [dec] bytes. Explanation The Cisco Fabric Services could not allocate memory. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-2-PSS_ERROR: [chars]: PSS ret. val=[dec]. Explanation The Cisco Fabric Services encountered an error while operating on a persistent storage database. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-26 Cisco MDS 9000 Family System Messages Reference OL-15956-01